FS: XTR Cranks and BB's , chain rings, spiders and more

tommid

Dirt Disciple
Abandoned project. Your chance to grab some bargains.
All prices posted. Paypal prefered.

XTR M951 or M952 5 bolt spiders
1 x 110 Spider
1 x 94 Spider
£10 each
4564208948_a25f8c2d7f_m.jpg

XTR M952 crank arms 175mm 2 drive side 2 non drive side.
1 of the drive side cranks has got slightly damaged splines where they are not as long as they should be, this crank still works fine, but I wouln't want to be doing any jumps or drop offs on it.
Having been stripped there is some small ammount of movement when mounted on a BB, powder coating them again woul do away with this. All threads are fine.
£30 the lot
4563574799_8af55f3385_m.jpg

4563573445_5971af730e_m.jpg


1x BM952 XTR BB 116mm works with 68 and 73 stiff but smooth I have tested it on the bike.
1x 7703 Dura Ace BB 68x 118.5
£10
4563573913_829fb70419_m.jpg


3x stripable M951 and M952 Billet pipe BB's
Top one 116 One set of bearings smooth
Middle one 112.5 Rough
Bottom 112.5 One set of bearings smooth
£20 the 3. New bearings available from SJS cycles.
4563577399_be0e9924db_m.jpg


Chain rings
Salsa brand new packaged 110 46t 5-9 speed £15
Goldtec 110 38t Singlespeed- very little wear
Blackspire 94 38t Singlespeed - Very little wear (I stripped the anodize off ready to polish)
QBP Engagment ring 56 or 58mm 22t NOS
Offers for the above aprt from the Salsa
4564206456_1bc4f1affa_m.jpg


Hope XC six bolt 32h smooth I bought for a project I paid £20 yours for £15
4563572965_57b889810e_m.jpg


Shimano 105 10speed 12-27 Cassette
Very little wear £15
4563576351_cd9e653897_m.jpg
 
Just a note:

tommid":2s4yqymj said:
Having been stripped there is some small ammount of movement when mounted on a BB, powder coating them again woul do away with this. All threads are fine.

I really wouldnt think this would solve any play between the crank and BB, the forces involved on this joint are enourmous, and a layer of powder coating is not structural. It would soon break up and crumble.

Good prices though for any one with the time to polish the cranks & replace the BB bearings.
 
Back
Top