Steerer Tube Swap Shop - shorter for longer! NO SALES!

Re: rockshox sid

I have a pair of sid that are 1 1/8 and the steerer is 180mm. I need one that is 200mm plus if anyone has one to swap out ?
 
Re:

ive got a 150mm threaded 1 1/4 manitou crown and want to swap for a similar length or 160 1 1/8th threaded...
 
Re:

I have a 1” 6.5” (163mm) manitou 4 crown. I need a 1 1/4 7” or (170mm) crown. Both are threaded.
Can anyone help?
 
I have a manitou 4 crown. 1” x 6.5” (163mm) for swaps. Is single bolt internal slot type

fluxcapacitor15":3j3rwhek said:
About to restore a Manitou 3 and the steerer is much longer than I need.
I'm fully capable of modifying, but I'm not in the habit of destroying unobtainium.

What I have: 1" threaded, about 7.5" overall (with 1.75" of thread).

What I could use: 1" threaded, about 6" overall.
 
Re:

Hi Folks, does anyone have a 1 1/4 threaded steerer 170mm long to swap for this 1" threaded one?



Cheers!

Richard
 

Attachments

  • Manitou 1.JPG
    Manitou 1.JPG
    655.4 KB · Views: 2,860
Hi
I have a blue Manitou SX mtb fork 1999 in excellent condition as hardly used with 195mm steerer column and would swap for a similar manitou or rock Shox Retro fork with 225mm or more steerer column please . Also have instruction manual. Photo attached , please contact if more photos needed .
Thanks
 

Attachments

  • D73BC095-BAF4-4E96-9683-147B7309136E.jpeg
    D73BC095-BAF4-4E96-9683-147B7309136E.jpeg
    199.4 KB · Views: 2,538

Latest posts

Back
Top