kettlo wrote:
I'll work on the artwork to make it more accurate. I will then make it a "double piece" so that the printers can print it out in one go and it wraps right around the bottle, hopefully making in resistant to pulls and rips. I have ssen some bottles that are similar to the TA ones but they have black printing on them. I have been told that acetone should remove the print from them. I am going to order some and try it out. If so I can let you have these for cost plus postage. You could then just get your stickers done...
That sounds great, yes acetone will remove it, Im a chemist! but be careful not to use too much or it will start to melt the plastic, wipe off with water though it will evaporate quickly. That or you could use a brillo pad or sandpaper. I'd be happy to get a bottle off you but I'll also try and source my own, I'll have a look and let you know
DD

_________________
Whatever the bike...YOU are the engine
----------------------------------------------------
Retro Bikes: Coyote Ultralight Mavic Helium's/Mektronic, Vitus KAS Kelly Carbone 9 Mavic SSC, 1991 Bottecchia SLX campag CRecord, 1980's Brian Rourke 531 SL Track Bike, TA/Unicanator/Dura Ace (was on world tour, tracked it down! FOUND IN AUSTRALIA!!! now home awaiting attention), Vitus 979 KAS Mavic SSC(gone not forgotten), 1980's Rossin SL campag SR(gone not forgotten), Look KG196 Mavic Mektronic/3G Trispokes/SSC(gone not forgotten), TVT Carbone 92 Dura Ace 7400 series(gone not forgotten)