Rod_Saetan
Old School Grand Master
- Feedback
- View
Simple question, I guess 107, using it with a single up front and 7 at the back if that makes a difference?
Ta.
Ta.
Shimano 600 (6207) cranks -what BB length?
- Thread starter Rod_Saetan
- Start date
Rod_Saetan
Old School Grand Master
- Feedback
- View
Inglese!
although Shimano Cranksets are made for JIS tapers an ISO taper BB will likely still work and the crank slide in a mm or so further each side (in theory offering better support of the aluminuim IMO) this can offer smaller/shorter Q- factor which is great as long as 1)your chainline still works
2)the inside ends of the cranks do not hit the either chainstay
3)the inside ring (or spider in your case) still clears the DS chainstay
2)the inside ends of the cranks do not hit the either chainstay
3)the inside ring (or spider in your case) still clears the DS chainstay
