Cheesedisease
Senior Retro Guru
I have an old set of Campagnolo Record Pista hubs, '70s I think. I believed a Phil Wood lockring wood fit as they use the same threading as Campagnolo ones - 1.32" x 24 tpi - and I'd read everywhere that these work fine. But it seems too small, which is annoying as I had one spare!
It does start to thread on, but binds after barely a half turn. Hub threads look fine, and I can't find mention of a differently threaded - 1.29" x 24 tpi - Phil lockring. The hub does take a standard 1.37" x 24TPI cog. Some kind of strange lockring size? Wanted to check before buying something else. Was considering a Miche cheapie to try, but have heard these are terrible due to softness of metal.
Unfortunately at work so can't get measuring, so appreciate any answers you can give!
It does start to thread on, but binds after barely a half turn. Hub threads look fine, and I can't find mention of a differently threaded - 1.29" x 24 tpi - Phil lockring. The hub does take a standard 1.37" x 24TPI cog. Some kind of strange lockring size? Wanted to check before buying something else. Was considering a Miche cheapie to try, but have heard these are terrible due to softness of metal.
Unfortunately at work so can't get measuring, so appreciate any answers you can give!
