Paganini frame Columbus tubing INFORMATION??

fo105

Dirt Disciple
I have just bought this Paganini frame and don't know a huge amount about it. I wonder if anyone else can help? The seat tube decal says Columbus SLX, but i'm unsure as there doesn't seem to be any rifling in the seat tube by the bottom bracket.

Flickr album: http://www.flickr.com/photos/80396674@N ... 435913968/

Other (potentially) useful indicators are internal brake cable routing along the top tube, Gipiemme rear dropouts, an embossed marking of '61' with an 'S' below on the underside of the BB shell, and the absence of any derailleur cable guide beyond the frame itself with a steel braze on.

Particularly interested in the type of tubing if not SLX, and the general quality of the frame as i'm not convinced that decals are accurate. Having said that, any information would be greatly appreciated.

Many thanks!
 
Sorry mate, I dont like what I see.
Looks like someone stuck an SLX sticker on the frame.

Paganini frames that were SL or SLX had engravings (pantograph's) all over the lugs etc.
They also had Chrome forks and rear stays. Dropouts were either Ultech, Columbus or Campagnolo.
Bottom bracket shell was Cinelli.

Yours is most likely Columbus Aelle tubing. Maybe, just maybe might be Columbus S if that S stamped on the BB relates to that.
They usually have the tubing type stamped on the original fork steerer.

The internal cable routing is typical Paganini style, so its safe to say it is an actual Paganini, just not SL or SLX tubing.

Judging by the rear caliper bracket design, it is an early Pag frame, probably pre 85/86.

Sandblast it and repaint it. Should be nice.
 
Cooker":2x38t15v said:
Sorry mate, I dont like what I see.
Looks like someone stuck an SLX sticker on the frame.

Paganini frames that were SL or SLX had engravings (pantograph's) all over the lugs etc.
They also had Chrome forks and rear stays. Dropouts were either Ultech, Columbus or Campagnolo.
Bottom bracket shell was Cinelli.

Yours is most likely Columbus Aelle tubing. Maybe, just maybe might be Columbus S if that S stamped on the BB relates to that.
They usually have the tubing type stamped on the original fork steerer.

The internal cable routing is typical Paganini style, so its safe to say it is an actual Paganini, just not SL or SLX tubing.

Judging by the rear caliper bracket design, it is an early Pag frame, probably pre 85/86.

Sandblast it and repaint it. Should be nice.

Thanks Cooker... rather the conclusion I was coming to as well! Also interesting to note that BB is English thread rather than Italian, which (if really Italian made Columbus frame) then is apparently indicative of stuff from Belgian shops like Plum-Vanqueur, who I understand sold the Paganini bikes.

Any ideas regarding as to how to work out whether frame is from Columbus Aelle, rather than something else altogether?

Spacing on rear dropouts is 126, which seems to support your thoughts regarding age.
 
Lower end Paganini frames were also made from Tange Japanese Tubing, so if the BB thread is British it could be Tange tubing, but I'm unsure if Tange correlates to British thread, its just a guess.

Apart from tapping the tubing with the back of your finger nail to see if its butted or straight gauge, I don't know how to tell what brand of tubing it is.

Having Gipiemme dropouts my feeling is that it is Columbus tubing but I can't be sure.
Someone that is a tubing expert should know by looking at it.
 
Hi there buddy :) I have to second what's already been said I'm afraid, but ... there is another Paganini on ebay (second listing cos it wont shift) that appears to be a genuine Pag and is carrying Columbus Aelle stickers. It looks similar in style to the one you've posted here. The thread below is from a while back when myself & another member had a few chats about his & my own Paganini's, check it out for clues :) Mines the Red Paganini Sioux, his the rebuild.

I've seen a few Paganini's now in the last 3 years, but they are far and few between. Mine has Ultrech/Ultech ? dropouts. I've seen 1 with Columbus dropouts too. The brake bridge looks familiar, but then again its quite common on bikes from the late 80's early 90's.

http://www.retrobike.co.uk/forum/viewtopic.php?t=149977

Hope some of this helps :) My best to you, Laz.

Edit: Here you go found that ebay link (It sure looks like yours)

http://www.ebay.co.uk/itm/VINTAGE-RETRO ... 3cc7695fab
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a Paganini.

Lovely to ride (and look at, IMO). Columbus tubeset - if anyone has any information on how to positively identify the tubing, that would be very useful. Supposedly EL/OS

I'd be interested in finding out more...
 
... and now I have my first post, I should be able to post a photo :D

229acd1e.jpg


ETA - with apologies for the mtb pedals...!
 
I would check the weight and the seatpin size.

Heavier tubing usually had thicker walled tubing so used 27mm seatpins or smaller.
 
Very nice!!!!
I like that dark red/brown colour, really looks classic.
Columbus SL most likely, going on the fact that the rear stays and front fork is chromed and the sticker on seat tube looks like early to mid 80's SL sticker. No Pag Panto's though on lugs which is odd for one with the chroming done.
You can really see the Concorde/Ciocc relationship by the Panto'd Italian flag on top tube.

If anyone is reading this thread and has a 58 or 59cm c-c columbus SL or higher Paganini I might be interested in purchasing it.
 
Difficult to tell by the wieght, as it's a rather large frame, so it will be over 2 Kg anyway.

Get it resprayed, get some nice new decals (try velocals in USA), stick a new SLX decal and it will be SLX.
In fairness, after 20-30 years they are what you want them to be

All this fuss about the ride quality of SLX over other decent steel is utter nonsense
 

Latest posts

Back
Top