Retrobike Forum Index

It is currently Tue Dec 06, 2016 7:16 am

* Login   * Register * Search  * FAQ



Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Campagnolo Victory SS
PostPosted: Thu Dec 06, 2007 5:59 pm 
Devout Dirtbag

Joined: Tue Aug 21, 2007 6:12 pm
Posts: 107
Location: North Notts
Hi,

I've been looking on ebay and local cycle shops for a single freewheel for my Campag Victory hub - (as in my previous thread)

I've had the following reply from a ebay seller.... Anybody know if this is the case - or know if there is anything out there that will fit before I source a new hub.

ta Dave O.


Good call, old 80's bikes make great one speeds. The shimano and ACS screw ons use a 1.375 inch by 24 threads per inch (TPI). Campag use a very slightly different size, this here link suggests that teh victory are a 1.370 inch 24 tpi, so I dont think it will fit. http://www.bikeforums.net/archive/index ... 60045.html
We have been one speed bikemongers for over two years now, and have not yet found anything that works on a campag hub. Best bet is to get a cheap shimano cassette style hub, we can then send you all manner of bits to turn it into a singlespeed, or even a fixed wheel.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 06, 2007 9:08 pm 
retrobike rider
retrobike rider
User avatar

Joined: Mon Nov 05, 2007 11:14 am
Posts: 1239
Like these?

http://66.102.9.104/search?q=cache:8eHc ... cd=1&gl=uk

http://www.excelsports.com/new.asp?page ... =8&minor=3


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 06, 2007 9:11 pm 
retrobike rider
retrobike rider
User avatar

Joined: Mon Nov 05, 2007 11:14 am
Posts: 1239
Sorry I've just read your heading, Campag. There is one I've seen a rear TT disc wheel with a screw on adaptor for track use, I know that's fixed gear but the spacing should be the same.

If you can't find the info try asking Nigel at www.campyoldy.co.uk

He may even have one, he's very helpful.........


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 09, 2007 12:56 am 
Devout Dirtbag

Joined: Tue Aug 21, 2007 6:12 pm
Posts: 107
Location: North Notts
Thanks mate I'll give him a call.. :D


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 09, 2007 1:21 pm 
Old School Hero

Joined: Sat May 05, 2007 7:27 pm
Posts: 203
Location: sheffield
if its a cassette rear hub,use the relevent rear sprocket you want and buy a single speed kit
e bay guy charliethebikemonger
does kits for both7 and 8/9 speed hubs,they are for shimano but its the spacers you want
put the spacers on to get chain line then your cog then spacers to fill hub up then secure it using the lockring
also easy to change ratios this way no faffing round with screw on freewheels
campyoldy is a really good shop would be suprised if he couldn; sort you out with some genuine stuff

hope it helps
tony


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

About Us

Follow Retrobike

Other cool stuff

All content © 2005-2015 Retrobike unless otherwise stated.
Cookies Policy.
bikedeals - the best bike deals in one place
FatCOGS - Fat Chance Owner's Group

Powered by phpBB® Forum Software © phpBB Group