Replacement brake lever hoods for 600ax levers?
- Thread starter mark3823
- Start date
The last NOS set of AX brakes went for £248, I think that answers the question.
If you are a completeist, the box included pads that go over the cables under the tape, but not the little Aeodynamic clip to hold the two cables together. That must be a Dura Ace thing.
If yours are split through, I do have some that are complete but ragged.
If you are a completeist, the box included pads that go over the cables under the tape, but not the little Aeodynamic clip to hold the two cables together. That must be a Dura Ace thing.
If yours are split through, I do have some that are complete but ragged.
one-eyed_jim
Old School Grand Master
Not light blue, and not even 600ax, but these Adamas levers are superficially similar:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0472980147
I don't know whether the hoods will fit or not, but at £10 a pair complete, it wouldn't break the bank to try.
The seller is Paul Milnes Cycles - a well-established Yorkshire cyclocross specialist. I've been a satisfied eBay customer of his in the past.
Three pairs left. Be quick!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0472980147
I don't know whether the hoods will fit or not, but at £10 a pair complete, it wouldn't break the bank to try.
The seller is Paul Milnes Cycles - a well-established Yorkshire cyclocross specialist. I've been a satisfied eBay customer of his in the past.
Three pairs left. Be quick!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
