Teckie question, a sign of madness or cunning plan

retrobloke · Feb 16, 2007

I need to ask this question because I am having trouble finding a decent set of forks with a 1" steerer. Is it possible to join together different makes of stanchions and crown/steerer (as long as they are both bolt on). Is it possible that the centre to centre hole measurements in the crown are the same for all makes ?

hollister · Feb 16, 2007

just saw a mag crown w/tange legs go on ebay the other day.

i have a bontrager(rigid) crown with an IRD steerer and syncros legs...

double check all you measurements/ torque specs and have at it

andrewl · Feb 16, 2007

retrobloke":2r0etzjp said:
Is it possible that the centre to centre hole measurements in the crown are the same for all makes ?

Possible, but not probable. Stanchion diameter will also be a factor to consider.

B3 · Feb 16, 2007

The steerer hole tends to be size specific, a competent engineer could machine a shim to reduce the steerer size from 1 1/4" down to 1 1/8" or 1".

It's what Marzocchi did with their bombers when they first released it.

Going up in size would depend upon if the crown was designed to cater for all sizes, and just machined to the specific size.

retrobloke · Feb 17, 2007

Thanks for the help guy's, perhaps not as easy as I first thought.

Teckie question, a sign of madness or cunning plan

retrobloke

Dirt Disciple

hollister

andrewl

Senior Retro Guru

B3

Senior Retro Guru

retrobloke

Dirt Disciple

Similar threads

Latest posts