valentinik_15
Dirt Disciple
Hi all.
I’m new to the Klein MC2 headset inner workings and just acquired a 96 Attitude MC2. After removing the Klein Locknut and MC2 StemBar, are there any other nuts bolts or screws holding the fork to the frame. I’m assuming that it would fall right off from below.
However, this is not the case. The fork is still stuck and despite malleting the steerer tube from above, nothing seems to budge. What am I doing wrong here. And what should I do without destroying the fork, bearings and frame.
Pls help.
I’m new to the Klein MC2 headset inner workings and just acquired a 96 Attitude MC2. After removing the Klein Locknut and MC2 StemBar, are there any other nuts bolts or screws holding the fork to the frame. I’m assuming that it would fall right off from below.
However, this is not the case. The fork is still stuck and despite malleting the steerer tube from above, nothing seems to budge. What am I doing wrong here. And what should I do without destroying the fork, bearings and frame.
Pls help.
