Hello everyone,
The Sachs 6000 rear hub I have on my Cadex seems to have some compatibility issues.
Currently I am using it with a Shimano HG41 -7 Cassette.
I had to put a very thin spacer behind it in order to prevent the lock ring from pressing the dust cap against the bearings, and hence, seize the whole freewheel.
With the spacer, the lock ring turns 1 1/2 turns until it is fully engaged. We're talking steel lock ring and steel cassette.
Here are the pictures:
https://imgur.com/a/Q0YcZ
Should I worry that the thing comes loose?
Are there other lock rings with thinner side walls?
Thanks for your suggestions.
-Dan
The Sachs 6000 rear hub I have on my Cadex seems to have some compatibility issues.
Currently I am using it with a Shimano HG41 -7 Cassette.
I had to put a very thin spacer behind it in order to prevent the lock ring from pressing the dust cap against the bearings, and hence, seize the whole freewheel.
With the spacer, the lock ring turns 1 1/2 turns until it is fully engaged. We're talking steel lock ring and steel cassette.
Here are the pictures:
https://imgur.com/a/Q0YcZ
Should I worry that the thing comes loose?
Are there other lock rings with thinner side walls?
Thanks for your suggestions.
-Dan