I am currently restoring my '95 Orange P7, does anybody know the thread size/form of the long bolt that holds the stem into the fork ? The plate inside my fork that the bolt screws into to secure the stem seems to have dropped down 15mm so I need a longer bolt or to make up an adaptor. Very strange.
I don't understand how this has happened as the bolt came out fine when I stripped the bike down, I can feel a ridge where the plate should be and the original bolt would be the right length if it went to where the ridge is. But now the plate is 15mm lower into the fork so my original bolt is too short.
I don't understand how this has happened as the bolt came out fine when I stripped the bike down, I can feel a ridge where the plate should be and the original bolt would be the right length if it went to where the ridge is. But now the plate is 15mm lower into the fork so my original bolt is too short.
