After giving away a spare pump, I've discovered the one I kept doesn't fit the forks I have, as the bit that screws on to the valve is too long to allow it to engage the valve inner and compress it, so I find myself needing an alternative one. Can anyone recommend one that will not break the bank and do a good job? I've seen a specialised one that apparently doubles as a standard pump, but not so sure about it, so anyone got any recommendations? Can't put air into my sts forks without one, and its almost finished.
Shock pump recommendation
- Thread starter ishaw
- Start date
ishaw":2y9ah8ta said:
I had the same problem with a shock pump that the valve screw bit was too long! I went for a fox one in the end with a short more flexable adapter was 24.99 on ebay...not got a model name but good for 300 psi and now had it a few years with no problems
Doug
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
marc two tone
Retrobike Rider
- Feedback
- View
I've got one of these in the shed. essentially a schraeder for upto 400 psi.
http://www.ebay.co.uk/itm/Raleigh-MTB-M ... 460fcc95be
It worked on a strata shock if that helps, as per orange X1.
If i can find, and it suits your needs i will let it go, cheap.
http://www.ebay.co.uk/itm/Raleigh-MTB-M ... 460fcc95be
It worked on a strata shock if that helps, as per orange X1.
If i can find, and it suits your needs i will let it go, cheap.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Similar threads
