Manitou 1 question

neilll · Nov 5, 2007

Hi,
I will at some point be looking for an original Manitou 1 fork for a project bike. I've just been offerered some original Manitou 1's but they need a lot of work - is it worth buying, i.e can these parts be had?

1) The elastomers are missing.
2) The O-ring on outer legs are damaged,
3) Brake Booster missing (currently fitted with incorrect carbon one)

Any help would be appreciated

Pickle · Nov 5, 2007

Unless they were giving them away, I wouldnt bother as you can pick a half decent set up for IRO Â£60/70. But yes, you can get bits for them still.

Here is a link for some Manitou's:
http://www.retrobike.co.uk/forum/viewtopic.php?t=15498

neilll · Nov 5, 2007

Thanks very much

Can the steerer tubes be changed like on some other forks, i.e. I could buy some the 'wrong' size and make them 1 1/4" like I need...??

Pickle · Nov 5, 2007

You should be able to.
I did that with some Pro-Circuit forks, which were identical in every aspect to Manitous, and then just got a metal shim so the steerer tube fitted snugly.

SLIM · Nov 5, 2007

steerers are not interchangeable as such , but you can change the crown/steerer , i have a couple of 1 1/4 steerers here

think i have enough elastomer left for one set of mani 1 as well

so only the seals you need , and i think jonnyretro will have some of them soon

JustKev · Nov 5, 2007

SLIM":378tvhpw said:
steerers are not interchangeable as such , but you can change the crown/steerer , i have a couple of 1 1/4 steerers here

do you mean between sizes, 1 1/8" or 1 1/4"? The steerers are changeable on the split crown original Mani 1's.

SLIM · Nov 5, 2007

steerer lengths are changeable on mani 1 (split crown) , but not diameter

Manitou 1 question

neilll

Pickle

neilll

Pickle

SLIM

JustKev

SLIM

Similar threads

Latest posts