jez-4-bikes-max
Kona Fan
- Feedback
- View
Look here. This miffed me last night:
I was fitting the pair of 1" steerered mag21's to the salsa last night:
The Salsa uses a Mountain Goat roller threaded headset.
The steerer was all set top go in and as I'm sliding it in and it gets abruptly wedged inside - it seems the lower portion of the mag21 steerer is wider then the diameter at the top part. Odd eh?
So....whats happening is the lower race inner cup is not allowing the steerer all the way through - it needs about an inch or so before it will go together.
Very odd. I thought at first the steerer was 1 1/8th - but it cant be for obvious reasons.
All I can think of is the headset just wont let 1" mag21 forks through. Unless I get a file out and start to address said blockage...either by taking off a little on the steerer or maybe the inner cup of headset.
Any thought sor experiences with this problem.
I was fitting the pair of 1" steerered mag21's to the salsa last night:
The Salsa uses a Mountain Goat roller threaded headset.
The steerer was all set top go in and as I'm sliding it in and it gets abruptly wedged inside - it seems the lower portion of the mag21 steerer is wider then the diameter at the top part. Odd eh?
So....whats happening is the lower race inner cup is not allowing the steerer all the way through - it needs about an inch or so before it will go together.
Very odd. I thought at first the steerer was 1 1/8th - but it cant be for obvious reasons.
All I can think of is the headset just wont let 1" mag21 forks through. Unless I get a file out and start to address said blockage...either by taking off a little on the steerer or maybe the inner cup of headset.
Any thought sor experiences with this problem.