Anyone got any tips for setting up a Klein Attitude press fit BB so that the correct chainline is achieved (cos my LBS buggered it up!). I believe that the axle should be centred to the frame and bearings whereas the mechanic in my LBS set it up so that the ends of the cranks are equal distance from the chainstays. This has left me with awful chainsuck in the middle ring.
Klein Chainline?!?!?!?
- Thread starter haggis
- Start date
magicmistertea
Gold Trader
- Feedback
- View
manual !
check out this link, there is a section in it explaining about the pressed fit bb.........
http://www.kleinjapan.com/tech_guide/pr ... manual.pdf
kernow bys vyken
check out this link, there is a section in it explaining about the pressed fit bb.........
http://www.kleinjapan.com/tech_guide/pr ... manual.pdf
kernow bys vyken
P20
Retrobike Rider
I can never remember if its the chainset or the frame that dictates the chainline. I know its supposed to be either 47.5mm or 50mm. Does it line up with either of these measurements?
Theres more on this at Sheldon Browns Site
Theres more on this at Sheldon Browns Site
Similar threads
