Chris king headset parts
- Thread starter h1rd
- Start date
Double-E F
Gold Trader
- Feedback
- View
Are the bearings still in the lower cup?
Is the assembly of the part on the right complete (flip it over to see..)?
And you'll need a base plate and a top cap to complete the set, I think.
Is the assembly of the part on the right complete (flip it over to see..)?
And you'll need a base plate and a top cap to complete the set, I think.
Re:
For your question about the top part, Chris Kings don't usually have the standard compression style top assembly. They simply rely on the rubber o-ring inside the top race and the pre-load from the stem, top cap and star nut. Watch out as this does eventually wear a groove into your fork steerer. I wouldn't use one on a carbon steerer.
You can get a standard king top assembly now though if you were worried.
For your question about the top part, Chris Kings don't usually have the standard compression style top assembly. They simply rely on the rubber o-ring inside the top race and the pre-load from the stem, top cap and star nut. Watch out as this does eventually wear a groove into your fork steerer. I wouldn't use one on a carbon steerer.
You can get a standard king top assembly now though if you were worried.
Similar threads
